Snapper Bearings & Bushings

Heavy-Duty Wheel Bearing
Part No. SN-215-079

• OEM: Snapper 1-1807, 7011807
• Fits Models: CUB CADET 30" and 40" cut decks
  DIXON 30" and 40" cut decks
• ID: 750"
• OD: 1.375"
• Height: 527"
• Heavy-duty

Price: $8.40

Wheel Bearing
Part No. SN-215-210

• OEM: Snapper 7028722
• Fits Models: ARIENS Most 21" walk behind mowers
  BUNTON 410-350-5 caster wheels
  JOHN DEERE 100 and LX series, 410-350-5 caster wheels
• ID: .750"
• OD: 1.380"
• Height: .495"
• With open back race for grease penetration
• 2 per pack

Price: $11.25

Wheel Bearing 3/4" x 1 3/8"
Part No. SN-215-046

• OEM: Snapper 1-1807, 7011807
• ID: .750"
• OD: 1.375"
• Height: .431"
• Low-speed

Price: $5.30

Bearing
Part No. SN-215-202

• OEM: Snapper 1-0756, 7010756
• Fits Models: ARIENS Many push, self propelled walk behind mowers
  SNAPPER 30" two stage large frame snowthrowers, series 0, 1, 3, 4, 5, 6; 25" rear engine riders, series 10, 12, 2, 3, 4, 5, 9
• Includes retaining ring
• ID: 0.623"
• OD: 1.375"
• Height: 0.429"

Price: $10.35

Heavy-Duty Wheel Bearing
Part No. SN-230-128

• OEM: Snapper 1-0953, 1-2390, 1-5474, 2-6693, 7026693, 7028722
• Fits Models: ARIENS Rear height adjuster, most 21" cut decks
  BUNTON Rear height adjuster, most 21" cut decks
  SNAPPER Self-propelled units
• ID: .750"
• OD: 1.380"
• Height: .482"
• Sealed

Price: $12.90

Hex Shaft Bearing
Part No. SN-230-106

• OEM: Snapper 1-2304, 2-8014, 7028014
• Fits Models: SNAPPER 21" self-propelled mowers
• ID: 0.376"
• OD: 1"
• Height: 0.310"

Price: $9.15

Spindle Bearing
Part No. SN-230-029

• OEM: Snapper 1-2828, 7012828
• Fits Models: AYP 917.270722, bottom bearing on spindle assembly
  MTD 491, 831, 832 and 930 series snowthrowers
  SNAPPER 60370 and 80499, 54" cut decks
• ID: .787"
• OD: 1.850"
• Height: .551"

Price: $13.30

Wheel Arm Bearing
Part No. SN-230-144

• OEM: Snapper 1-8767, 46983, 7046983
• Fits Models: SNAPPER Self-propelled 21" walk behinds
• ID: 0.560"
• OD: 1.375"
• Height: 0.437"

Price: $12.80

Left Hand Axle Bushing
Part No. SN-225-987

• OEM: Snapper 5-0918, 7050918
• Fits Models: SNAPPER Riders with 26"-33" cut decks
• ID: 3/4"
• OD: 1 3/4"
• Height: 1 3/4"

Price: $6.75

Bearing
Part No. SN-230-037

• OEM: Snapper 1-0696, 1-3313, 5-4073, 7013313
• Fits Models: YAZOO YR60 and YR76
• ID: 7/8"
• OD: 1 11/16"
• Height: 1 1/4"
• REF. NO.: DG1945B2RKACS41

Price: $14.35

Bearing
Part No. SN-230-033

• OEM: Snapper 1-0696, 1-3313, 5-4073, 7013313
• Fits Models: SNAPPER 30" two stage large frame snowthrowers and rear engine riders
  TROY BILT 14000, 30042SR, 42" side discharge center mount; 14001, 51048SR, 48" side discharge mount;and 14002, 42" rear discharge center mount
  YAZOO YR60, 76
• ID: 750"
• OD: 1781"
• Height: 610"

Price: $8.90

Output Shaft Support Bearing
Part No. SN-230-056

• OEM: Snapper 7-6504, 7076504
• Fits Models: BOBCAT 32", 36" and 48" decks
  BUNTON 32", 36" and 48" decks, variable speed units
  EXMARK 32", 36" and 48" decks, variable speed units
  JACOBSEN 32", 36" and 48" decks, variable speed units
  JOHN DEERE Variable speed units
  KEES 32", 36" and 48" decks, variable speed units
  SNAPPER 32", 36" and 48" decks
• ID: 625"
• OD: 1572"
• Height: 1"
• Extended inner race
• Includes 2 set screws
• Self-aligning type

Price: $23.15

Bearing
Part No. SN-230-086

• OEM: Snapper 1-9125, 7-6510, 7019125
• Fits Models: EXMARK Lazer Z
  JACOBSEN Crew King
  JOHN DEERE PC2003 32"-52" commercial walk behinds
  SNAPPER Pro gear drive loop and pro hydro loop handleseries, pro 8 gear drive loop, pro gear drive pistol grip series
• ID: .984"
• OD: 2.441"
• Height: .669"

Price: $14.45

Heavy-Duty Spindle Bearing
Part No. SN-230-090

• OEM: Snapper 1-9125, 7-6510, 7019125
• Fits Models: EXMARK Lazer Z
  JACOBSEN Crew King
  JOHN DEERE PC2003 32"-52" commercial walk behinds
  SNAPPER Pro gear drive loop and pro hydro loop handle, pro 8 gear drive loop, pro gear drive pistol grip series
• ID: .984"
• OD: 2.441"
• Height: .669"
• Metal seals High quality, commercial grade

Price: $17.40

Bushing
Part No. SN-225-722

• OEM: Snapper 7-6514, 7076514
• Fits Models: EXMARK Viking, Explorer, Metro, Turf Tracer and TurfRanger
  SNAPPER Variable speed walk behinds
• ID: 7/8"
• OD: 1 1/8"
• Height: 1 1/4"
• Bottom bushing for caster yoke support arm

Price: $6.20

Spindle Bearing
Part No. SN-230-076

• OEM: Snapper 1-4514, 7-7324, 7014514
• Fits Models: BOBCAT Variable speed units
  JACOBSEN Crew King
  JOHN DEERE Units with variable speed transmissions
  SNAPPER tractors, pro gear drive loop handle series 0, 1, 2, 4; 36" V and 48" pro deck attachmentseries 0, 2, 4; pro gear drive pistol grip series 1, 2, 4 for disc drive
• Double seal
• ID: 0.625"
• OD: 1.375"
• Height: 0.430"

Price: $12.55

Bearing
Part No. SN-230-102

• OEM: Snapper 4-6555, 7-9813, 7046555
• Fits Models: GRASSHOPPER 9544, 9548, 9552, 9561 and 9572
  JACOBSEN Turfcat 50 and 60
  JOHN DEERE 160, 260, 261 and 272 rotary mowers; 359 snowthrowers; 60" mid-mount 400 series mowers; 72" 900 series mowers
  SNAPPER Hydro gear drive ZTR series 4, 5; 42", 48", 60" decks, mid-mount ZTR series 2, 4
  TORO 1977 and older Groundsmasters
• ID: 0.984"
• OD: 2.047"
• Height: 0.590"

Price: $11.50

Spindle Bearing
Part No. SN-230-076

• OEM: Snapper 1-4514, 7-7324, 7014514
• Fits Models: BOBCAT Variable speed units
  JACOBSEN Crew King
  JOHN DEERE Units with variable speed transmissions
  SNAPPER tractors, pro gear drive loop handle series 0, 1, 2, 4; 36" V and 48" pro deck attachmentseries 0, 2, 4; pro gear drive pistol grip series 1, 2, 4 for disc drive
• Double seal
• ID: 0.625"
• OD: 1.375"
• Height: 0.430"

Price: $12.55