Toro Bearings & Bushings

Toro Bushings

Fuel Tank Toro Bushings
Part No. SN-125-336

• OEM: Toro 104047, 46-6560
• ID: 3/8"
• OD: 1 1/16"
• Height: 5/8"
• Material: Rubber
• Fits 33/64" diameter tank hole
• Made by an OEM supplier
• Not compatible and warranty void with equipment using greater than 10% ethanol-blend fuel

Price: $5.65

Toro Bearings

Toro Bearings
Part No. SN-230-060

• OEM: Toro 38-7820, John Deere JD8535
• Fits Models: Toro S-200, S-620 and CCR2000 snowthrowers, John Deere LX172, LX173, LX176, LX178, LX186, LX188, GT242, GT262, GT275, Z TRAK
• ID: .669"
• OD: 1.575"
• Height: .475"

Price: $8.50

Bearing
Part No. SN-230-160

• OEM: Toro 106947, 109842, 109842, 251-351, 31-0530, John Deere JD9239, JD9296
• REF. NO.: DG1945B2RKACS41
• ID: 750"
• OD: 1.781"
• Height: 610"
• Made by Koyo

Price: $14.50

Wheel Bearing
Part No. SN-215-210

• OEM: Toro 110513, 251-210
• Fits Models: ARIENS Most 21" walk behind mowers
  BUNTON 410-350-5 caster wheels
  JOHN DEERE 100 and LX series, 410-350-5 caster wheels
• ID: .750"
• OD: 1.380"
• Height: .495"
• With open back race for grease penetration
• 2 per pack

Price: $22.50

Flange Bearing
Part No. SN-225-560

• OEM: Toro 51-4270
• Fits Models: Toro Mid-size units with Peerless transmissions
• ID: 5/8"
• OD: 3 1/4"
• Height: 3/4"
• Two 9/32" mounting holes
• 2 1/2" center to center

Price: $23.30

Spindle Bearing
Part No. SN-230-045

• OEM: Toro 101480
• ID: 0.750"
• OD: 1.624"
• Height: 0.498"

Price: $23.10

Spindle Bearing
Part No. SN-230-052

• OEM: Toro 106084, 106085, 37-0200
• ID: 0.750"
• OD: 1.575"
• Height: 0.475"

Price: $11.60

Spindle Bearing
Part No. SN-230-078

• OEM: Toro 103119
• .750 Spindle Shaft
• 4 1/2" overall length
• Length: 2"
• OD: 1.500
• REF. NO.: 1630-2RS

Price: $35.60

Toro Bearings
Part No. SN-230-037

• OEM: Toro 106947, 109842, 109842, 251-351, 31-0530
• Fits Models: YAZOO YR60 and YR76
• ID: 7/8"
• OD: 1 11/16"
• Height: 1 1/4"
• REF. NO.: DG1945B2RKACS41

Price: $14.50

Bearing
Part No. SN-230-033

• OEM: Toro 106947, 109842, 251-351, 31-0530
• Fits Models: SNAPPER 30" two stage large frame snowthrowers and rear engine riders
  TROY BILT 14000, 30042SR, 42" side discharge center mount; 14001, 51048SR, 48" side discharge mount;and 14002, 42" rear discharge center mount
  YAZOO YR60, 76
• ID: 750"
• OD: 1781"
• Height: 610"

Price: $9.30

Heavy-Duty Wheel Bearing
Part No. SN-215-079

• OEM: Toro 110513, 251-210
• Fits Models: CUB CADET 30" and 40" cut decks
  DIXON 30" and 40" cut decks
• ID: 750"
• OD: 1.375"
• Height: 527"
• Heavy-duty

Price: $10.10

Wheel Bearing 3/4" x 1 3/8"
Part No. SN-215-046

• OEM: Toro 110513, 251-210
• ID: .750"
• OD: 1.375"
• Height: .431"
• Low-speed

Price: $5.90

Bearing
Part No. SN-230-300

• OEM: Toro 251-207
• Fits Models: ARIENS ST424, ST524, ST624, ST724, ST732, ST824, ST832; 824, 932 and 1032 snowthrowers
  JOHN DEERE ST424, ST524, ST624, ST724, ST732, ST824, ST832; 824, 932 and 1032 snowthrowers
  TORO 824 and 932
• ID: .750"
• OD: 1.750"
• Height: .500"

Price: $23.00

Bearing
Part No. SN-230-102

• OEM: Toro 113514, 251-257
• Fits Models: GRASSHOPPER 9544, 9548, 9552, 9561 and 9572
  JACOBSEN Turfcat 50 and 60
  JOHN DEERE 160, 260, 261 and 272 rotary mowers; 359 snowthrowers; 60" mid-mount 400 series mowers; 72" 900 series mowers
  SNAPPER Hydro gear drive ZTR series 4, 5; 42", 48", 60" decks, mid-mount ZTR series 2, 4
  TORO 1977 and older Groundsmasters
• ID: 0.984"
• OD: 2.047"
• Height: 0.590"

Price: $11.60

Spindle Bearing
Part No. SN-230-029

• OEM: Toro 251-297, 251-8
• Fits Models: AYP 917.270722, bottom bearing on spindle assembly
  MTD 491, 831, 832 and 930 series snowthrowers
  SNAPPER 60370 and 80499, 54" cut decks
• ID: .787"
• OD: 1.850"
• Height: .551"

Price: $13.30

Heavy-Duty Wheel Bearing
Part No. SN-230-237

• OEM: Toro 251-299
• Fits Models: BOBCAT 5 speed units
  ENCORE 5-speed walk behinds
  EXMARK Metro
  JOHN DEERE 110, 112, 140, 200, 312, 314, 316, 317, 318,420 and 430 series
  SCAG 5 speed units
• ID: 1"
• OD: 2"
• Height: .562"

Price: $8.30

Roller Bearing
Part No. SN-215-103

• OEM: Toro 254-94
• Fits Models: EZ-GO Front wheel bearing for carts with 1" spindle
  FERRIS Front wheel bearing for carts with 1" spindle
  GRASSHOPPER Front wheel bearing for carts with 1" spindle
  JOHN DEERE 46"-50" snowthrowers; 51" rotary brooms; 303,305, 550 and 1500 tillers
  SCAG New style spindles
  TORO Reelmaster 223D and 5100D and Greensmaster 3,300, 3000 and 3100
• ID: 1"
• Height: .579"
• Tapered cone
• Fits our SN-215-111 Bearing Race

Price: $13.70

Bearing Race
Part No. SN-215-111

• OEM: Toro 254-72
• Fits Models: JOHN DEERE 303, 305 and 1500
  SCAG New style spindles
  TAYLOR-DUNN New style spindles
  TORO Greensmaster 3, 300, 3000 and 3100, Reelmaster 223D and 5100D
• OD: 1.980"
• Height: .420"

Price: $10.10

Roller Bearing
Part No. SN-215-095

• OEM: Toro 254-78
• Fits Models: JACOBSEN Greensking II and IV, Trim King, Tri-King 1471, 1671, 1684D, LF100 and 3810
  JOHN DEERE 2243, 2653, 3215, 3225, 3235 and 3365
  TORO Roughmaster, Greensmaster, Spartan and Reelmaster
• ID: .750"
• OD: 1.525"
• Height: .660"
• Tapered cone

Price: $13.40

Bearing Race
Part No. SN-215-087

• OEM: Toro 254-79
• Fits Models: JACOBSEN Greensking II and IV, Trim King, Tri-King 1471, 1671, 1684D, LF100, 3810 and Super Pro
  JOHN DEERE 2243, 2653, 3215, 3225, 3235 and 3365
  TORO Roughmaster, Spartan, Reelmaster and Greensmaster
• OD: 1.781"
• Height: 475"

Price: $8.60

Toro Bearings

Spindle Bearing
Part No. SN-225-367

• OEM: Toro 68-8980
• Fits Models: ARIENS For front caster wheel 40" and 50" decks
  GRAVELY Front caster wheels 40" and 50" decks
• Length: 3 3/8"
• ID: 1/2"
• OD: 3/4"

Price: $12.30