Brands:

Why Ultimate Parts?

» 110% Low Price     Guarantee
» 200,000+ Items in    Stock
» Every Item is Brand    New
» Risk Free Returns
» Fast Delivery from    Multiple    Nationwide    Warehouses

LawnMower Bearings and Bushings

Dixie Chopper | Honda | John Deere | Snapper | Toro

Are you looking for lawnmower bearings and bushings? We carry a wide range of deck bearings, roller bearings, spindle bearings, and other heavy duty wheel bearings. The plain bearings are most popular among the inexpensive rotary lawn mowers, due to their construction simplicity and low cost. Frictionless bearings come in different varieties such as the ball, roller or needle type bearings.

There are number of reasons why bearings are important. The heat and vibration are the two biggest negative factors that affect your lawnmower equipment. In case of the heat there isn’t much that you can change, but in case of vibration there are some preventive steps that can be taken. For instance, if the machine spindle is not attached and held in place firmly, the bearings will wear out too early. At the same time, the machine speed is reduced and therefore the productivity will drop. And the end result, the overall machine maintenance will increase and eventually the overall life expectancy of the lawnmower will be decrease.

That is why the lawnmower bearings and bushings were invented. They are designed to minimize the vibration and endure the wear of the unit. For that reason, it is critical to have quality replacement bearings and bushings installed.

1 Year Warranty
Designed to reduce vibration and endure wear of the machine
Specially engineered to endure rugged conditions of outdoor power equipment applications

Spindle Bearing
Part No. SN-230-019

OEM: Dixie Chopper 67205
ID: 625"
OD: 1375"
Height: 430"
Trash guard seal

Price: $9.20

Bearing Race
Part No. SN-215-111

OEM: Dixie Chopper 10206
Fits Models: JOHN DEERE 303, 305 and 1500
SCAG New style spindles
TAYLOR-DUNN New style spindles
TORO Greensmaster 3, 300, 3000 and 3100, Reelmaster 223D and 5100D
OD: 1.980"
Height: .420"

Price: $9.55

Roller Bearing
Part No. SN-215-103

OEM: Dixie Chopper 10207
Fits Models: EZ-GO Front wheel bearing for carts with 1" spindle
FERRIS Front wheel bearing for carts with 1" spindle
GRASSHOPPER Front wheel bearing for carts with 1" spindle
JOHN DEERE 46"-50" snowthrowers; 51" rotary brooms; 303,305, 550 and 1500 tillers
SCAG New style spindles
TORO Reelmaster 223D and 5100D and Greensmaster 3,300, 3000 and 3100
ID: 1"
Height: .579"
Tapered cone
Fits our SN-215-111 Bearing Race

Price: $14.55

Bearing
Part No. SN-230-003

OEM: Dixie Chopper 67205
Fits Models: ARIENS 24" and 32" snowthrower attachments drive train
CUSHMAN Truckster
MTD 020, 030, 406, 430, 700, 719, 730, 740, 756 and 766 series
MURRAY Lawn edgers
SCAG Turf Tiger
YAZOO YR60 and YR76
ID: .625"
OD: 1.375"
Height: .430"

Price: $9.10

Wheel Bearing
Part No. SN-215-370

OEM: Dixie Chopper 10205
Fits Models: DIXIE CHOPPER 50" and 60" cut decks
GRASSHOPPER 6372, 9048, 9052 and 9061
JOHN DEERE PC2003 32"-52" commercial walk behinds
ID: .625"
OD: 1.381"
Height: .577"

Price: $13.35

Bearing
Part No. SN-230-033

OEM: Honda 91102-VA4-003
Fits Models: SNAPPER 30" two stage large frame snowthrowers and rear engine riders
TROY BILT 14000, 30042SR, 42" side discharge center mount; 14001, 51048SR, 48" side discharge mount;and 14002, 42" rear discharge center mount
YAZOO YR60, 76
ID: 750"
OD: 1781"
Height: 610"
Honda code: 1688217

Price: $8.90

Spindle Bearing
Part No. SN-230-029

OEM: Honda 91102-VA4-013
Fits Models: AYP 917.270722, bottom bearing on spindle assembly
MTD 491, 831, 832 and 930 series snowthrowers
SNAPPER 60370 and 80499, 54" cut decks
ID: .787"
OD: 1.850"
Height: .551"
Honda code: 3175999

Price: $13.30

Bearing
Part No. SN-230-605

OEM: Honda 91001-ZF1-003, 96100-62050-00
Fits Models: HONDA GX140, GX160, GX200, GX240, GX270, GX340 andGX390
ID: 980"
OD: 2050"
Height: 590"
Honda code: 0636977/3684248

Price: $13.15

Bearing
Part No. SN-230-060

OEM: Toro 38-7820, John Deere JD8535
Fits Models: Toro S-200, S-620 and CCR2000 snowthrowers, John Deere LX172, LX173, LX176, LX178, LX186, LX188, GT242, GT262, GT275, Z TRAK
ID: .669"
OD: 1.575"
Height: .475"

Price: $8.40

Bearing
Part No. SN-230-160

OEM: Toro 106947, 109842, 109842, 251-351, 31-0530, John Deere JD9239, JD9296
REF. NO.: DG1945B2RKACS41
ID: 750"
OD: 1.781"
Height: 610"
Made by Koyo

Price: $12.65

Roller Bearing
Part No. SN-022-196

OEM: Toro 52-3180
Fits Models: Toro 4 bolt adjust and single point adjust cuttingunits

Price: $33.85

Wheel Bearing
Part No. SN-215-210

OEM: Toro 110513, 251-210
Fits Models: ARIENS Most 21" walk behind mowers
BUNTON 410-350-5 caster wheels
JOHN DEERE 100 and LX series, 410-350-5 caster wheels
ID: .750"
OD: 1.380"
Height: .495"
With open back race for grease penetration
2 per pack

Price: $11.25

Flange Bearing
Part No. SN-225-560

OEM: Toro 51-4270
Fits Models: Toro Mid-size units with Peerless transmissions
ID: 5/8"
OD: 3 1/4"
Height: 3/4"
Two 9/32" mounting holes
2 1/2" center to center

Price: $23.20

Spindle Bearing
Part No. SN-230-045

OEM: Toro 101480
ID: 0.750"
OD: 1.624"
Height: 0.498"

Price: $22.99

Spindle Bearing
Part No. SN-230-052

OEM: Toro 106084, 106085, 37-0200
ID: 0.750"
OD: 1.575"
Height: 0.475"

Price: $11.50

Spindle Bearing
Part No. SN-230-078

OEM: Toro 103119
.750 Spindle Shaft
4 1/2" overall length
Length: 2"
OD: 1.500
REF. NO.: 1630-2RS

Price: $34.70

Fuel Tank Bushing
Part No. SN-125-336

OEM: Toro 104047, 46-6560
ID: 3/8"
OD: 1 1/16"
Height: 5/8"
Material: Rubber
Fits 33/64" diameter tank hole
Made by an OEM supplier
Not compatible and warranty void with equipment using greater than 10% ethanol-blend fuel

Price: $5.65

No photo available

Bearing
Part No. SN-230-037

OEM: Toro 106947, 109842, 109842, 251-351, 31-0530
Fits Models: YAZOO YR60 and YR76
ID: 7/8"
OD: 1 11/16"
Height: 1 1/4"
REF. NO.: DG1945B2RKACS41

Price: $14.35

Bearing
Part No. SN-230-033

OEM: Toro 106947, 109842, 251-351, 31-0530
Fits Models: SNAPPER 30" two stage large frame snowthrowers and rear engine riders
TROY BILT 14000, 30042SR, 42" side discharge center mount; 14001, 51048SR, 48" side discharge mount;and 14002, 42" rear discharge center mount
YAZOO YR60, 76
ID: 750"
OD: 1781"
Height: 610"

Price: $8.90

Heavy-Duty Wheel Bearing
Part No. SN-215-079

OEM: Toro 110513, 251-210
Fits Models: CUB CADET 30" and 40" cut decks
DIXON 30" and 40" cut decks
ID: 750"
OD: 1.375"
Height: 527"
Heavy-duty

Price: $8.40

Wheel Bearing 3/4" x 1 3/8"
Part No. SN-215-046

OEM: Toro 110513, 251-210
ID: .750"
OD: 1.375"
Height: .431"
Low-speed

Price: $5.30

Bearing
Part No. SN-230-300

OEM: Toro 251-207
Fits Models: ARIENS ST424, ST524, ST624, ST724, ST732, ST824, ST832; 824, 932 and 1032 snowthrowers
JOHN DEERE ST424, ST524, ST624, ST724, ST732, ST824, ST832; 824, 932 and 1032 snowthrowers
TORO 824 and 932
ID: .750"
OD: 1.750"
Height: .500"

Price: $24.40

Bearing
Part No. SN-230-102

OEM: Toro 113514, 251-257
Fits Models: GRASSHOPPER 9544, 9548, 9552, 9561 and 9572
JACOBSEN Turfcat 50 and 60
JOHN DEERE 160, 260, 261 and 272 rotary mowers; 359 snowthrowers; 60" mid-mount 400 series mowers; 72" 900 series mowers
SNAPPER Hydro gear drive ZTR series 4, 5; 42", 48", 60" decks, mid-mount ZTR series 2, 4
TORO 1977 and older Groundsmasters
ID: 0.984"
OD: 2.047"
Height: 0.590"

Price: $11.50

Spindle Bearing
Part No. SN-230-029

OEM: Toro 251-297, 251-8
Fits Models: AYP 917.270722, bottom bearing on spindle assembly
MTD 491, 831, 832 and 930 series snowthrowers
SNAPPER 60370 and 80499, 54" cut decks
ID: .787"
OD: 1.850"
Height: .551"

Price: $13.30

Heavy-Duty Wheel Bearing
Part No. SN-230-237

OEM: Toro 251-299
Fits Models: BOBCAT 5 speed units
ENCORE 5-speed walk behinds
EXMARK Metro
JOHN DEERE 110, 112, 140, 200, 312, 314, 316, 317, 318,420 and 430 series
SCAG 5 speed units
ID: 1"
OD: 2"
Height: .562"

Price: $8.25

Roller Bearing
Part No. SN-215-103

OEM: Toro 254-94
Fits Models: EZ-GO Front wheel bearing for carts with 1" spindle
FERRIS Front wheel bearing for carts with 1" spindle
GRASSHOPPER Front wheel bearing for carts with 1" spindle
JOHN DEERE 46"-50" snowthrowers; 51" rotary brooms; 303,305, 550 and 1500 tillers
SCAG New style spindles
TORO Reelmaster 223D and 5100D and Greensmaster 3,300, 3000 and 3100
ID: 1"
Height: .579"
Tapered cone
Fits our SN-215-111 Bearing Race

Price: $14.55

Bearing Race
Part No. SN-215-111

OEM: Toro 254-72
Fits Models: JOHN DEERE 303, 305 and 1500
SCAG New style spindles
TAYLOR-DUNN New style spindles
TORO Greensmaster 3, 300, 3000 and 3100, Reelmaster 223D and 5100D
OD: 1.980"
Height: .420"

Price: $9.55

Roller Bearing
Part No. SN-215-095

OEM: Toro 254-78
Fits Models: JACOBSEN Greensking II and IV, Trim King, Tri-King 1471, 1671, 1684D, LF100 and 3810
JOHN DEERE 2243, 2653, 3215, 3225, 3235 and 3365
TORO Roughmaster, Greensmaster, Spartan and Reelmaster
ID: .750"
OD: 1.525"
Height: .660"
Tapered cone

Price: $13.40

Bearing Race
Part No. SN-215-087

OEM: Toro 254-79
Fits Models: JACOBSEN Greensking II and IV, Trim King, Tri-King 1471, 1671, 1684D, LF100, 3810 and Super Pro
JOHN DEERE 2243, 2653, 3215, 3225, 3235 and 3365
TORO Roughmaster, Spartan, Reelmaster and Greensmaster
OD: 1.781"
Height: 475"

Price: $7.50

Spindle Bearing
Part No. SN-225-367

OEM: Toro 68-8980
Fits Models: ARIENS For front caster wheel 40" and 50" decks
GRAVELY Front caster wheels 40" and 50" decks
Length: 3 3/8"
ID: 1/2"
OD: 3/4"

Price: $12.95